1-6X24 IR Riflescope

Optical sight is mainly divided into the following three categories: Telescopic sight, Collimating optical sight, Reflex sight. 1-6x24 and 5-30x50 belong to telescope sight with amplification function and can see and identify distant targets, which is suitable for long-range accurate shooting. Because it is often used for sniper purposes, it is also often called a sniper scope.

  • Waterproof

  • Anti-fog

  • Anti-vibration

  • 6 zoom ratio

  • 4 inches (100mm) Eye Relief & a Bigger EYE-BOX, keep your eyes in a comfortable and safe position when you aim.

  • Ultra Wide Field of View, Enable you to gain wider vision, for the least feel of constraint at aiming;

  • Low dispersion glass provides higher resolution and color fidelity, ensures smaller aberrations across the system and optimized lens involvement for high-definition images;

  • A flatter imaging surface ensures excellent imaging performance from the center to the edge of the full field of view. It also minimizes aiming errors when the center of the field of view is not selected as your aiming point;

  • Smaller image distortion, to satisfy the most demanding requirements of clients;

  • High-grade glass elements and excellent full multi-layer coating, resulting in a higher transmission, providing exceptional performance in low light conditions;

  • Constructed from a solid block of 6061-T6 aircraft grade aluminum as well as heat treatment, our main tube is 20% stronger than normal scopes, solid reliability of high shock resistance;

  • Water-proof, fog-proof, shock-proof;

  • All lens are made of lead-free glasses, which is environmentally friendly and lighter in weight;

  • Capped adjusting handle;

  • Sunshade available.

  • This illuminated glass reticle uses MOA as the unit of each cell for ranging and W/E direction adjustment.

  • All dimensions are indicated as sight 4x data.

  • Installation of sight:

    The optical axis of sight is quasi-parallel to a reference weapon barrel axis. After calibrating the nearest distance, just raise the horizontal line in the reticle of the scope accordingly when aiming.

  • Ballistic adjusting:

    • Windage Turret - The windage turret is the knob located on the side of the scope and is used to adjust the horizontal alignment.

    • Elevation Turret - The elevation turret is the knob located on the top of the scope and is used to adjust the vertical alignment.

    • The principle is to adjust the windage turret first, then adjust the elevation turret.

    • Each sound is as a click value when adjusting, the value is 1/2 inch (ballistic moving distance) at 100 meters.

    • 1/2 inch = 1.27m

    • Formula: Adjustment in clicks on scopes = 100*bias(cm) / target distance (m) / 1.27 (please pay attention to the identification of the technical parameters of the manual. The click value of some scopes’ are 1/2, 1/8 means is the ballistic travels 1/2, 1/8 of an inch at 100 yards)

  • Parallax focus knob:

    • A trimmer knob for built-in ballistic adjustment and parallax reduction. It labels 10, 15, 20, 30….. 100, 200, 300, 500, infinite (in yards as unit, 1 yard is 0.9 meters). Adjusted to the corresponding distance when shooting at different distances to minimize parallax.

  • Parallax focus inside knob:

    • Used to adjust the brightness of the reticle.